Tag: rail

Railway Stations Near Me – 2 – Higham

In the second of this series, I look at Higham Railway Station on the North Kent Line.  The station was 28 miles Down from its previous terminus at Charing Cross, however the Thameslink service no longer goes to Charing Cross, instead stopping at London Bridge before going though the London Core on its way to the its new end at Luton.

The first thing of note here is Higham Tunnel, at 1531 yards in length.  It originally was constructed in 1801 to serve the Thames and Medway canal, which acted as a passage for military traffic from Woolwich through Gravesend and Higham to the dockside at Chatham.  When traffic on the canal didn’t reach expected levels, the newly formed Gravesend and Rochester railway company acquired the canal and tunnel, putting a single track rail line alongside the canal.  This lead to the opening of Higham Station in 1845.

There are actually 2 tunnels, separated by what is locally known as ” the bomb hole”.  This was an area for the barges to cross.  The second tunnel is the “Strood” tunnel and at 2329 yards in length is the longest of the two.  The tunnels received extensive refurbishment in 2004 due to rock falls, and are now strengthened by steel and concrete.

A year later, the Gravesend and Rochester railway company was itself absorbed into the South Eastern Railway.  It is at this point the canal was drained fully, and a second rail line put in.  At this time the railway did not divert to the Medway towns, instead carrying on to Maidstone via the Medway Valley.  It was not until 1939 that a spur from Strood would carry trains onto the Chatham Main Line to Gillingham.

Higham would have a couple of sidings, both on the Up and Down lines, although both had been removed by the mid 1960s.  The most unusual piece freight unloaded by the station was a Swiss chalet in 1864 as a gift for Charles Dickens, who lived at nearby Gad’s Hill.

Although initially accessed by a foot crossing, platforms are reached via a lattice footbridge, a common sight throughout the Southern Region in the 20th Century.  The station building still survives, and was still heated by the original fireplace as late at the 1980’s.

The ticket office is open for only part of the day, at other times a permit to travel ticket must be purchased from a PERTIS machine, located by the bridge on the Up side. The station was served by SouthEastern until May 2018, when the new Thameslink Class 700 service to Luton/Rainham commenced and took over the 2 tph (each way) Stopping service.  Class 395 SouthEastern “Javelin” trains pass though, as well as various freight though the day, some heading for the nearby “Hoo Junction” Yard, around 2 miles further on the Up line.

Two pictures follow.  The first by me, shows a Class 66 hauling stone wagons exiting the Higham Tunnel on the Up line.  A train can also be seen passing through “The Bomb Hole” on the Down line heading towards Gillingham.

P1000393

The second is a view towards the station building, taken from the Down platform.  This photo by Nigel Thompson (credit under photo)

3614705_28c3986d

Higham railway station, Kent
cc-by-sa/2.0 – © Nigel Thompson – geograph.org.uk/p/3614705

Please visit Rainham Rail Enthusiast on YouTube.

Please visit Rainham Rail Enthusiast on Instagram.

Please visit Mistydale Model Railway on Facebook.

That’s all for now, thanks for reading and I’ll blog again soon.

Railway Acronyms, Words and Sayings

Many acronyms words and sayings are used on the railway, they provide ease of communication when passing important messages, or just as a concise non cluttered way of getting across a meaning without ambiguity.  I use some of these in my blog, and provide this list (though not exhaustive) in a way to explain some of these terminologies.  Some do not require much explanation, some a little more so!

  • 3rd Rail – Electrification of the railway by means of a 3rd rail, usually beside one of the running rails.  Common in the UK in the South East of the country
  • AHBC – Automatic Half Barrier Crossing – a crossing which doesn’t go the full length of the roadway.
  • AOCL – Automatic Open Crossing – a crossing with no barrier, which is controlled by the train crew before they proceed.
  • AWS – Automatic Warning System – An in cab warning system for use in Block Signalling operations.  A disc inside the cab either shows black, which means the signal approaching is green, or is yellow/black (in the style of a sunflower) which indicates the next signal is at caution (yellow/double yellow) or stop (red).  A horn will sound inside the cab to indicate the next signal is not green, and the diver will have to push  an acknowledgement button within 2.75 seconds, otherwise emergency brakes will be applied. The indicator will then change from black to “sunflower”, and remain like this until a green signal is approached, where it will change to black again.
  • Catenary –  Overhead wires which power a train, via a Pantograph on the train.
  • DEMU – Diesel Electric Multiple Unit – a train which can use both diesel and electric power.  An example of which is the British Rail class 205 unit which worked in the South East of the UK between 1957 and 2004, and which were part of the British Rail “slam-door” stock.
  • DLR – Docklands Light Railway – a railway system in London which uses driverless trains.
  • DMU – Diesel Multiple Unit – a diesel only train, many in use today such as the 153 unit seen on many rural lines in the UK.
  • DOWN – Typically the railway line moving away from London.
  • DSD – Drivers Safety Device – a switch on the floor which the driver must keep depressed in order to enable the train to move.  Think of it as a dead mans switch, if it is not depressed then the train cannot take power.
  • EMU – Electric Multiple Unit – a train solely powered by electricity.
  • ERTMS – Part of The Digital Railway , Signalling within the cab, not trackside.
  • ETCS – Again, part of  The Digital Railway , a European signalling system.
  • HS (1,2 etc) – UK High speed lines.
  • Pantograph – Located on the roof of a train or locomotive, connects to a Catenary to provide power.
  • PERTIS – Permit to travel – usually in relation to machines at unmanned stations, these PERTIS machines would give you a ticket to enable you to start your journey.  You would then show this on the train to the guard to obtain a real ticket.  These are being superseded by self service ticket machines.
  • RAKE –  more than 1 coach or wagon coupled together will form what is known as a RAKE.
  • SPAD –  Signal Passed At Danger. When a train or locomotive passes a red signal, emergency brakes will be applied.  This generates a SPAD, which is reported to the relevant authorities.
  • TPWS – Train Protection and Warning System, advance system of the AWS.
  • UP – typically the railway line moving Towards London.

As previously said, this list is not exhaustive, I will update this blog page as and when new acronyms are used in my blog.

Please Visit Rainham Rail Enthusiast On YouTube.

Please Visit Rainham Rail Enthusiast On Instagram.

Please Visit Mistydale Model Railway On Facebook.

Many thanks for reading, I’ll blog again soon.

Medway Stations 4 – Cuxton

Continuing my look at stations in the Medway area, this time I shall look at a small station on the Medway Valley line – Cuxton.

Cuxton Station was opened in 1856, and from the outset had two lines.  Two platforms served by an level crossing at the south end of the station allowed passengers to travel to Maidstone to the south, and Strood to the North.  In 1862, a signal box was erected adjacent to this level crossing, and is still there today (2018)

In 1931 a small siding was opened to the south of the station, trailing off the “down” line, which served a national business (Besto Co.) making fruit baskets. This was followed in 1939 with a goods loop installed to the north of the station.  Unfortunately, none of these sidings survive today, both having been removed by the end of 1990.

A footbridge was installed at the south end of the station in 1961, adjacent to the level crossing and the Signal box.  A note about the level crossing, as it is still manually closed  by the signalman at the time of this Blog (2018).  A really rare sight, and (unfortunately) I will assume this will become automated at some time in the future.

Two views from Cuxton in 2016 follow.  The first shows a light engine class 66, travelling on the “down” line towards Maidstone.  This view is to the north, and the bridges across the M2 can be seen, the nearest one being the HS1 line.

cuxton a

The second view is to the south, showing the signal box, overbridge and level crossing, as well as a stone train travelling on the “up” towards Strood.

cuxton b

Currently at Cuxton, there is only a PERTIS (permit to travel) machine installed here, the majority of the station buildings being disused for many years.  The station is served at this time by Southeastern, with 2 trains per hour (northbound “up” to Strood, southbound “down” to Maidstone (1 Tph continues to Paddock Wood, the other to Tonbridge). (correct as of June 2018)

A few freight trains run though the day, to or via Hoo Junction (to the north) or to the south, some of which come from or go to ARC sidings just outside Allington in Maidstone.  Freight is mainly hauled by class 66 locomotives, although some class 70’s have also been seen on the line.

Please visit Rainham Rail Enthusiast on YouTube

Please visit Rainham Rail Enthusiast On Instagram

Please visit Mistydale Model Railway On Facebook

That’s all for now, thanks for reading and I’ll blog again soon.

The Class 700

On Sunday 20th May 2018, new rail services were due to start between Rainham in Kent and Luton.  Unfortunately, as well publicised in the media (here) things didn’t go according to plan.  But this is not what this blog is about.  This blog looks at the workhorse of that service, the new Class 700 unit, most of which at the time of this blog were owned by Thameslink (although Great Northern will have some).

The trains were built between 2014 and 2018 by Siemens in Germany.  The initial order was for 60 Eight car trains and 55 twelve car trains.  They are scheduled to replace all the class 319s on the Thameslink Network.

Their maximum speed is 100mph, and are electrically supplied with a third rail shoe (750 V DC) as well as a pantograph for overhead operation (25 Kv AC).  They are fully fitted with air conditioning, and a regenerative braking system.

The units are capable of working as ATO (Automatic train operation), which means the train can drive itself.  This is already in operation along the “Thameslink Core” which  links the East Coast mainline to the network around St Pancras.  The usual safety AWS is installed, as well as the ability to upgrade this easily to the new Digital Railway signalling as and when it is operational.

Two shots of the exterior of the train are below, one is of the information plate :P1000809P1000811

Interior shots of the train taken by myself at Rainham are below:

P1000813P1000816

The images above show the standard configuration in standard class.  1st class carriages have slightly better seats and tables.  As you can see, the train is totally able to be walked through, although first class carriages are separated.  On the 8 car trains there are 3 toilets (1 disabled).  I believe this is increased by one each om the 12 car trains.  Luggage racks above the seats are large, plenty of space for a small case.

The new information boards show various information, including carriage loading indicators and information on the London transport network:

P1000825P1000818P1000820P1000819P1000815P1000824P1000823P1000812

They also show the time and the next station stop, as well as the usual scrolling information about the service you are on and its destinations.  Overall, these are very impressive and very informative.

As good and shiny as this train is though however, its glaring problem is the seating in standard class, which is well documented if you perform a basic internet search.  Having done a full 2 and a half hour journey from Rainham (Kent) to Luton, I can indeed say that these seats are not built for that length of journey.  They are quite hard, and realistically I see only around an hour and a half being the maximum journey time you would want on them.

This however is not a problem.  The train is really designed with the commuter in mind, so the core user would only be using it for a short journey, either up to London from Medway, or up to London from Luton.  As a modern train it really performs well, with good acceleration and the ride comfort in relation to bumps and jolts is really very smooth. All onboard announcements are clear and concise.

If the lessons from the seating can be learnt, then new variants of this train could be learnt and improvements made to what is in essence a very fine unit.  As an addition to the fleet roster in the south east it is very capable, and notwithstanding the seats, a very enjoyable ride.

Please visit Rainham Rail Enthusiast  on YouTube

Please visit Rainham Rail Enthusiast On Instagram

Please visit Mistydale Model Railway On Facebook

That’s all for now, thanks for reading and I’ll blog again soon.

 

The Digital Railway

Last week (10th May 2018) , the British Government in association with Network Rail announced that it would be investing in a digital railway, but what is that?

Basically, for well over a hundred years, railway signalling in the UK is a “block” based system. That is, a pre defined area of railway ‘blocks’ divide up the network, and no two trains can occupy the same block at the same time. In recent years, if a train moves past a red signal in to an occupied block, the onboard safety system (TPWS) will apply the emergency brake. This system albeit very safe, is very inefficient. A better way would be to allow the trains to report their position, speed etc. This would allow trains to run safely at closer distances, and would increase the capacity on the network.

The cost would be high, but as many of the signalling systems in the UK are nearing an upgrade, the spend would not necessarily be in addition to works which have been already identified by Network Rail.

To better explain this, the following video from Network Rail shows the current system of signalling, and how the new digital systems would improve the UK rail network.

Please also visit Rainham Rail Enthusiast on YouTube
Please also visit Rainham Rail Enthusiast On Instagram
Please also visit Mistydale Model Railway On Facebook

That’s all for now, thanks for reading, I’ll blog again soon.

Banbury – Gateway To Almost Everywhere!

In the June of 2017, I visited Banbury Railway station, with a short trip to Heyford.  I had seen many videos from the station with its varied traction, but mainly wanted to see the Chiltern Railway services from London Marylebone to Birmingham,  some of which are class 68 / 67 hauled.  The day certainly didn’t disappoint.

Firstly a little history.  Banbury Railway Station opened in 1850 as Banbury Bridge Street Station, for the GWR.  At first it was just a single line station, but due to popularity was increased to double track a few years after opening.  Goods loops were also installed around the station, notably adjacent to the “up” line.  This also provided access to the LNWR route via another Station, Banbury Merton Street.  Further terminating bays and goods loops followed, cementing Banbury’s importance in the rail network.  In 1948 during nationalisation, the station was renamed Banbury General.

Banbury Merton Street closed in 1960, and with that Banbury General was renamed Banbury.  Some, but not all, of the goods loops around the station have subsequently been removed, and the station now has 4 lines, served by three platforms.

Many freight services pass through Banbury, mainly intermodal workings from/to Southampton.  Below are two images of Freightliner 66 501s working on the “Up” line from Southampton docks towards London.

fl again3fl again 2

The main current (2018) passenger services are as follows :

Chiltern Railways:

3 tph to London Marylebone 
2 tph to Birmingham Moor Street, 1 of which carries on to Birmingham Snow Hill

Cross Country:

Services to Bournemouth, Manchester, Reading and Newcastle

GWR

Cherwell Valley line services to Reading and Didcot Parkway

As you can see, it really is a gateway across a good part of the country!  The two pictures below are of Class 68 locomotives, on loan from DRS, on services to London Marylebone (top) and Birmingham New Street (bottom) for Chiltern Railways.

68 368 5

And here are a couple of Cross Country Voyagers, en route to Manchester and London respectively.

double vomit comet

I have also posted a video to my YouTube channel, and this can be seen below:

The station staff are friendly and are ok with photography / video work, obviously with the rules of the railway always being adhered to.  I really enjoyed my visit here, so much going on with all different types of traction, and hope to visit again in the future.

Please also visit Rainham Rail Enthusiast on YouTube

Please also visit Rainham Rail Enthusiast On Instagram

Please also visit Mistydale Model Railway On Facebook

That’s all for now, thanks for reading, I’ll blog again soon.

Stations Near Me – 1 – Sittingbourne

As a companion to my ongoing series of potted station histories in the Medway area, this blog subsection will concentrate on other stations near to where I live in Rainham (Kent). The first is Sittingbourne.

Sittingbourne station opened on the 25th January 1858, as part of the East Kent Railway (later to be merged with the South Eastern railway to form the South East and Chatham Railway). At this time, trains would terminate at Chatham and a horse and cart would transfer passengers to Strood, where they would join passengers on the South Eastern Railway.

The large and impressive station building is situated on the “up” line, with 2 platforms, the “down” side connected by a subway. Goods sidings at this time were adjacent to the “up” line, to the east of the main station building. In 1860, services to Sheerness-on-Sea commenced via a new line next to the existing down platform, making this platform an island type.

In 1899, a new footbridge linked the two platforms, complementing the existing subway. It was around this time that the station was also re-named “Sittingbourne & Milton Regis”, a name it was to retain until changed back to “Sittingbourne” in 1970.

The Southern Railway took over in 1923, The goods sidings on the “up” line were removed around this time. In its place, a small goods yard was installed to the side of the “down” platform. Serving primarily the paper mills, it also provided stabling for chemical trains going to Sheerness Steel in the late 20th Century.

Electrification at Sittingbourne came quite late in 1958 (the lines further west through Gillingham had been electrified since the late 1930’s). With electrification, the old semaphore signals were removed, with full electric light signals put in their place.

In recent history, a new bridge to the east of the station building was opened in April 2012. This included a lift for passengers. This was a great improvement on the situation before that, which required passengers who needed assistance to be taken across the tracks via a walkway with a member of station staff. A full refurbishment to the toilets and station building was also undertaken at this time, as well as new platform shelters. The subway was blocked in the early 2000s.

The station building is the oldest piece of railway architecture surviving in the area.

Incidents:

Three major incidents have occurred either in or near the station:

1861 : A derailment just outside the station causing 1 death.

1878 : A collision within the station as a passenger train ran into static goods vans. The fault for this was attributed to the goods shunter. 5 People died.

1966 : 18 vans of a freight train de-railed just past western junction on the “Down” approach to the station. This caused extensive damage to the infrastructure and closure of the entire line for two days. Thankfully there were no casualties.

Some information contained is this blog was obtained from the KentRail Sittingbourne Page .

Photographs (c) David Glasspool and Stacey Harris

Videos I have taken can be found on the RainhamRailEnthusiast YouTube Page.

My model railway has a Facebook page, click to view Mistydale Model Railway .

You can also follow me on Instagram : @RainhamRailEnthusiast

and Twitter : @RainhamRail

Many thanks for reading this Blog instalment – goodbye and I’ll Blog soon.

Sheerness-On-Sea Railway Disaster 1971

In this blog, I will write about the railway accident which occurred on 26th February 1971 at Sheerness-on-Sea railway station.  All relevant links to content are at the foot of this blog.

On the evening of 26th February, the 17:16, 10 car train from Victoria to Sheerness entered the station but failed to stop and the first carriage ended up careering into the station, demolishing most of the booking hall.  Unfortunately 1 person died and 13 injured, including the driver.  A more detailed look at the accident is contained below.

The train itself was a 2-HAP built for the Kent Coast line between 1958 and 1963.  This particular train comprised of 5, 2-car trainsets, all steel construction on standard BR bogies.  The power to these trains was via a controller in the cab which requires it to be depressed at all times in order to take power.  If this handle is not depressed, the brakes will apply automatically, with around a 2-3 second delay.  This so called “dead man switch” still applies today, in various forms.

As noted by various eye witnesses, many of whom were railway staff, the train appeared to slow correctly when entering platform one, but was seen to be going too fast as it ran along the platform.  Indeed one eyewitness – railwayman M.Gordon remarked to a colleague “that train is not going to stop”.

A few seconds later, the leading cab ploughed into the platform 1 buffer assembly, at what is believed to be around 10-15mph.  The upper portion of the front coach detached from the bogie assembly and carried on over the concourse, demolishing most of the ticket office and taking out a centre beam before crashing though the front of the building and coming to rest.

The fatality was a Mrs Joyce Carr, who had just bought a ticket from the office.  The 13 other injured were taken to Medway hospital, including a near term pregnant woman who gave birth 2 hours later.

The Official Report states the following conclusions to the accident.

The driver – Mr Rothwell, had suffered a head injury at Holborn Viaduct a year earlier, in which he was unconscious for around 8 minutes.  After extensive testing and evaluation, he was passed fit to drive again July 1970, and re-examined in October the same year.  Another test was planned for April 1971.

Mr Rothwell when interviewed stated that he remembered applying a slow brake to the train when entering the station, but that the next thing he remembered was being slumped over the cab after the accident.  This was in agreement with at least two other witnesses who found Mr Rothwell in the cab afterwards

The overall conclusion is that the driver had blacked out, slumping over the controls, thus still providing the connection with the controllers Dead-Man switch.  The train carried on at 10-15 Mph, before connecting with the buffers. This caused immediate application of the emergency brake, slowing the rest of the train.  Indeed, only the second carriage was further damaged, most of that ending up on the detached bogie of the leading carriage.

Following the disaster, the station building was demolished, and a new one built to the side.

The following are links to the original source for this blog:

KentOnline – Sheerness train crash remembered

Sheppey Website – Sheerness train crash

KentRail – Sheerness-on-Sea

Runaway Train – YouTube Video (c) Graham White

Official MOT Report 1971

If you are interested in Sheerness on Sea railway station, I created a vlog there in 2021 :

Please visit my YouTube channel – Rainham Rail Enthusiast for videos of modern and vintage railway action.

Many thanks for reading – I’ll blog again soon.

Shameless YouTube promotion!!

Well, it doesn’t hurt!!  Here is the YouTube channel for Rainham Rail Enthusiast.  Showcasing my love of trains, both modern and heritage, plus a section for my model railway, Mistydale. Thanks for watching.

Mistydale Model Railway – an overview

Mistydale model railway is a fictitious static model railway, with heritage and modern traction.  At the heart of the model has always been ‘Mistydale station’, a Heritage line connected to the mainline.  153 DMUs service the railway from the mainline via Foxburrow Junction Station in the nearby town of Foxburrow.

Below is a picture across to Mistydale Station, with a 153 DMU in Platform 1 and the station vehicle park featuring vintage vehicles, play area with tea room.

mistydale a

Another view below shows the station at night.

mistydale b

After trains leave Mistydale, they enter the heritage line passing through Merlin Halt

mistydale f

The train then either returns back through the countryside back to Mistydale, or can access the mainline via Mistydale North Junction to the mainline loop.  Here Barleycorn Depot can be found

mistydale g
mistydale h

After a small countryside journey, trains can access the line through to Foxburrow Junction Station, which has adjacent to it Foxburrow Yard.  Below is two pictures of Foxburrow Junction station in January 2018, when the branch to Mistydale was fully restored.

mistydale c
mistydale d
mistydale e

I will occasionally Blog about Mistydale, but for the latest information, pictures and video, please visit Mistydale Model Railway

Mistydale model railway is also featured on the Rainham Rail Enthusiast YouTube page.

Many thanks for reading, I’ll Blog again soon.